High-Temperature Sintering Furnaces up to 1550 °C
Brand: Nabertherm
Category:
Zirconia Sintering Furnaces
Designed as a table-top model with SiC heating rods, this comparably inexpensive high-temperature furnace offers numerous advantages when sintering non-translucent zirconia with an operating temperature of up to 1500 °C. The heating chamber and fast heat-up times make this model a good choice for CAD/CAM machining of zirconia. The controller of the furnace is freely programmable for the individual sintering of the zirconia material. The high-temperature furnace is also designed for connection to the single-phase power grid.
- Tmax 1550 °C
- Working temperature 1500 °C, increased wear and tear of heating elements must be expected in case of working at higher temperatures
- Single-phase connection (LHTCT 01/16)
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- Exclusive use of insulation materials without categorization according to EC Regulation No 1272/2008 (CLP). This explicitly means that alumino silicate wool, also known as “refractory ceramic fiber” (RCF), which is classified and possibly carcinogenic, is not used
- Scope of delivery includes a starter set for charging on one level, additional levels as additional equipment
- Furnace chamber can be charged with up to two (LHTCT 01/16) or four (LHTCT 03/16) saggars, 15 individual crowns per level
- Adjustable air inlet
- Type S thermocouple
- Switching system with solid-state-relays, power tuned to the SiC rods
- Easy replacement of heating rods
- Controller with touch operation C550 (10 programs with each 20 segments)
- MyNabertherm App for online monitoring of the firing on mobile devices for free download
- Freeware NTEdit for convenient program input via MS Excel on the PC
- Freeware NTGraph for evaluation and documention of firings using MS Excel on the PC
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
- Defined application within the constraints of the operating instructions
Additional equipment
- Over-temperature limiter with adjustable cutout temperature as temperature limiter to protect the furnace and load
- Square saggar for charging of up to two layers (15 single crowns)
- Lid for top saggar
- Process control and documentation via VCD software package for monitoring, documentation and control
Model | Tmax | Inner dimensions in mm | Volume | Maximum | Outer dimensions in mm4 | Connected | Electrical | Weight | Minutes | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
°C | w | d | h | in l | units | W | D | H1 | load kW | connection* | in kg | to Tmax2 | |
LHTCT 01/16 | 1550 | 110 | 120 | 120 | 1.5 | 30 | 340 | 300 | 460 + 195 | 3.5 | 1-phase | 18 | 30 |
LHTCT 03/16 | 1550 | 120 | 210 | 120 | 3.0 | 60 | 400 | 535 | 530 + 215 | 10.0 | 3-phase3 | 40 | 30 |
*These furnaces are available for main voltage of 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE1Including opened lift door 2In the empty and closed furnace, connected to 230 V 1/N/PE rsp. 400 V 3/N/PE3Heating only between two phases 4External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. |
Inquiry - High-Temperature Sintering Furnaces up to 1550 °C